Washington's 31st District: 2010-2024 voting patterns and August 2026 vote counts
County comparisons: available elections from 2010-2024, with 2012 missing. Separate candidate-count table: August 4, 2026 primary.
This study traces the King-Pierce county split in Washington's 31st Legislative District from 2010 to 2024. A separate table reports August 2026 primary candidate counts.
Washington's 31st Legislative District, covering parts of King and Pierce counties, elects one state senator and two representatives. Examining named-candidate votes, excluding write-in entries, in state Senate and House races from 2010 through 2024, missing a 2012 source, King County's share of the district's pooled vote fell from about 38.6% in the 2010 primary to about 11.8% in the 2024 primary. Across 18 race-years, primary vote counts averaged about 52% of general vote counts. Redistricting and other causes for these changes cannot be established from these records alone. The August 2026 candidate table is separate from the 2010-2024 county comparisons.
Explanation updated September 12, 2026. The dates above describe the records studied.
named-candidate vote
A vote count combining votes for candidates listed by name, excluding rows recorded simply as write-in. It is not a count of unique voters.
pooled vote
Votes from multiple races or counties added together for comparison, not a single contest's result.
primary-to-general ratio
The raw count of primary votes divided by the raw count of general-election votes for the same race. It is not a turnout rate among registered voters.
Principal limit Every count in this article except the 2026 primary table excludes any row whose candidate field is the literal string WRITE-IN, so it is a named-candidate count, not a full vote count.
Answer
This covers recorded votes for State Senator, House Position 1 and House Position 2 in Washington's 31st Legislative District (King and Pierce counties) from 2010 through 2024. 2012 is missing from every figure here because its source file returns HTTP 404, not because turnout was zero. Every count is a named-candidate vote, the total for individually named candidate rows, excluding any row labeled WRITE-IN, because that is the one definition confirmed uniform across all seven observed years. King County's share of the pooled named-candidate vote fell from about 38.6% in the 2010 primary to about 11.8% in the 2024 primary, and each race-year's primary count is between about 0.389 and 0.603 of its general count. Nothing here establishes why King's share changed or why any year's ratio moved as it did.
Material qualifications
Every count in this article except the 2026 primary table excludes any row whose candidate field is the literal string WRITE-IN, so it is a named-candidate count, not a full vote count.
2012 is absent from every table and figure because its source file returned HTTP 404, not because turnout was zero or the year was skipped intentionally.
Nothing in this packet establishes why King's recorded share changed or why any year's ratio moved as it did; only the arithmetic of recorded votes is reported.
Current answer from edition 0001 · Dated September 12, 2026 ·This dated edition
Evidence covers sources through September 12, 2026.
How has King County's share of the vote changed since 2010?
King County's share of the district's pooled named-candidate vote, King's count divided by King plus Pierce, was about 38.6% in the 2010 primary and 35.2% in the 2010 general. By 2024 it had fallen to about 11.8% in the primary and 11.2% in the general. Every observed year in between shows a further step down, except that 2012 has no figure because its source file is unavailable.
King County's share of the pooled named-candidate vote declined across observed cycles
King County's share of the district's pooled named-candidate vote, King divided by King plus Pierce, fell from about 38.6% in the 2010 primary and 35.2% in the 2010 general to about 11.8% in the 2024 primary and 11.2% in the 2024 general. This measures the geographic split of recorded contest votes between the two counties, not a partisan measure and not a count of unique voters or ballots. 2012 has no figure in this series.
What is a named-candidate vote, and why exclude write-ins? A named-candidate vote is the vote total for an individually named candidate row in a source, for a given race and year; any row whose candidate field is literally 'WRITE-IN' is excluded. This is the one definition confirmed uniform across all seven observed cycles, since some years' totals include write-ins and others exclude them by label, making a raw total not comparable across years on its own.
What does 'King's share' mean here? King's share is King County's named-candidate vote divided by King's plus Pierce's named-candidate vote, for a given race, stage and cycle. It measures the geographic split of recorded contest votes between the two counties, not a partisan measure and not a count of unique voters.
Every count in this article except the 2026 primary table excludes any row whose candidate field is the literal string WRITE-IN, so it is a named-candidate count, not a full vote count.
How has King County's share of the pooled vote moved across each observed cycle?
Figure 1. King's share of the pooled recorded vote at both stages across the seven observed cycles, with 2012 shown as a marked gap.Download chart (PNG)
King's share fell in nearly every observed cycle, from the high 30s in 2010 to about 11-12% in 2024, with 2012 shown as a gap rather than a value.
Every count in this article except the 2026 primary table excludes any row whose candidate field is the literal string WRITE-IN, so it is a named-candidate count, not a full vote count.
2012 is absent from every table and figure because its source file returned HTTP 404, not because turnout was zero or the year was skipped intentionally.
View data table
Scroll horizontally to see all columns.
Figure 1 data. How has King County's share of the pooled vote moved across each observed cycle? Each quantity appears rounded to two decimals and again exactly as recorded. Exact plotted rows: assets/data/king-share-by-cycle.csv
Year (calendar year)
Stage (primary or general)
King named-candidate votes (votes)
King named-candidate votes as recorded (votes)
Pierce named-candidate votes (votes)
Pierce named-candidate votes as recorded (votes)
King share (share of King plus Pierce)
King share as recorded (share of King plus Pierce)
Why King's share declined is not established by this data.
What 2012's figure would have shown.
Where does the county-by-county detail come from?
The statewide result files used for the district's overall vote counts contain no breakdown by county for 2010 through 2020. The King and Pierce county figures for those five cycles were taken from that archive's by-county pages for those years, and the 2022 and 2024 county detail came from its by-county result files.
County-level detail for 2010 to 2020 comes from the archive's by-county pages
The statewide files used for named-candidate totals carry no county-level detail for 2010 through 2020, so the King and Pierce figures for those five cycles come from the same archive's by-county pages for those years. County detail for 2022 and 2024 came directly from by-county result files.
What is a 'contest vote,' and can these be added into one ballot count? A contest vote is a vote count for one specific race, State Senator, House Position 1 or House Position 2. Summing across the three contests does not produce a count of unique ballots or voters, because one voter's single ballot can contribute a vote to each of the three contests separately.
King and Pierce county detail for 2010 through 2020 comes from the archive's by-county pages for those years, not from the statewide files used for the other counts.
Whether county detail for 2010-2020 could be added directly from the original statewide files.
How much did King's share change between specific pairs of years?
This edition reports three windows of observed years as direct before-and-after comparisons of King's general-stage share: 2010 to 2014, down 4.53 points; 2018 to 2022, down 7.35 points; and 2022 to 2024, down 11.11 points. The first two pairs each pool the same three contests on both sides. The 2022-to-2024 pair does not, because 2024's ballot had no State Senate race, so it pools only two contests against 2022's three.
Three reported year-to-year comparisons of King's general-stage share
King's general-stage share of the pooled vote fell 4.53 points from 2010 to 2014, fell 7.35 points from 2018 to 2022, and fell 11.11 points from 2022 to 2024. The first two pairs pool the same three contests on both sides; the 2022-to-2024 pair does not, because no State Senate race appeared on the 2024 ballot, so 2022 pools three contests and 2024 pools two.
Why compare 2010-2014, 2018-2022 and 2022-2024 specifically? These are the three windows this edition reports, not the only pairs the series allows: 2010-2014 and 2018-2022 each pool the same three contests on both sides, and other same-composition pairs, such as 2014-2018, can be computed from the per-race table. The 2022-2024 pair is included but pools a different number of contests, three in 2022 and two in 2024, because no State Senate race was on the 2024 ballot.
Nothing in this packet establishes why King's recorded share changed or why any year's ratio moved as it did; only the arithmetic of recorded votes is reported.
How much did King's general-stage share change between specific pairs of years?
Figure 2. The three point changes in King's general-stage share: 2010 to 2014, 2018 to 2022 and 2022 to 2024.Download chart (PNG)
The three windows this edition reports (2010-2014, 2018-2022, 2022-2024) show declines of 4.53, 7.35 and 11.11 points, and the last pair pools a different number of contests than the other two. Other same-composition pairs can be computed from the per-race table.
Nothing in this packet establishes why King's recorded share changed or why any year's ratio moved as it did; only the arithmetic of recorded votes is reported.
View data table
Scroll horizontally to see all columns.
Figure 2 data. How much did King's general-stage share change between specific pairs of years? Each quantity appears rounded to two decimals and again exactly as recorded. Exact plotted rows: assets/data/king-share-year-pairs.csv
Whether these changes reflect a boundary change or another cause is not established by vote counts alone.
Comparing elections before and after 2022
Pooling every named-candidate vote across 2010, 2014, 2016, 2018 and 2020 gives King a 31.31% share; pooling 2022 and 2024 gives King a 17.70% share, a difference of 13.61 points. This pooled figure is larger than any single year-pair change because it combines a decline already visible in the earlier cycles with the additional change after 2022. Treating this pooled figure as caused entirely by one event would overstate what that event explains.
A two-bucket pooled comparison shows a larger decline than any single year-pair
Pooling every named-candidate vote from 2010-2020 (both stages) against 2022 and 2024 (both stages) puts King's share at 31.31% before and 17.70% after, a decline of 13.61 points. This is larger than any single one of the three year-pair changes because it combines a decline already under way before 2022 with the further change between 2022 and 2024.
What does the pooled 2010-2020 versus 2022-2024 comparison add? It shows that grouping the five earlier observed cycles against the two most recent ones produces a 13.61-point drop in King's share, larger than any single year-pair change, because it combines a decline already under way with the additional change after 2022.
The pooled comparison of 2010-2020 against 2022-2024 combines a decline already visible before 2022 with the further change between 2022 and 2024, so it overstates what any one change explains on its own.
How much of the 13.61-point pooled change is attributable to any single cause is not established.
How does the primary vote compare to the general vote each year?
For each of 18 race-years between 2010 and 2024, the primary named-candidate vote count divided by that year's general named-candidate vote count ranged from about 0.389 to about 0.603, averaging about 0.521. Non-presidential-year races averaged a higher ratio, about 0.536, than the overall range as a whole. This ratio reflects raw recorded vote counts in each stage, not a rate of registered voters turning out.
Primary vote counts are a smaller fraction of general vote counts, varying by year
Across 18 race-years from 2010 to 2024, the ratio of primary named-candidate votes to general named-candidate votes ranged from about 0.389 to about 0.603, with an overall mean of about 0.521. Non-presidential-year races averaged a higher ratio, about 0.536 (range 0.390 to 0.581), than the overall figure. This is a ratio of raw vote counts, not a turnout rate among registered voters.
What does the primary-to-general ratio measure? For one race and year, it is that race's primary named-candidate vote count divided by its general named-candidate vote count. It is a ratio of raw recorded vote counts, not a registered-voter turnout rate, so part of its variation reflects population change rather than turnout.
The primary-to-general ratio is a ratio of raw recorded vote counts, not a registered-voter turnout rate, so part of its variation reflects population change rather than turnout behavior.
What a registered-voter turnout rate would show for the same races and years.
Latest recorded district votes
The August 4, 2026 primary recorded 34,247 votes for State Senator, 33,996 for House Position 1 and 33,986 for House Position 2, from the state's official statewide export. These totals include any write-in votes, unlike the named-candidate-only counts used for the historical comparisons above. The export carries no county-level breakdown; it does record each contest's candidate options with their own vote counts, which this edition does not reproduce.
August 2026 primary totals were 34,247, 33,996 and 33,986 across the three contests
The August 4, 2026 primary recorded 34,247 votes for State Senator, 33,996 for House Position 1, and 33,986 for House Position 2, from the state's official statewide export. These are all-candidate totals including any write-in votes, a different basis than the named-candidate-only figures used elsewhere in this article. The export also records each contest's candidate options with their own vote counts, which this edition does not report; it carries no county split.
What do the 2026 primary numbers represent? They are the recorded vote total for each of the district's three contests in the August 4, 2026 primary, on an all-candidate basis including write-ins, taken from the state's official statewide export. The export carries no county split, and there is no general-election figure to compare them with yet. It does record each contest's candidate options with their own vote counts, and it is published on this site at /research/31st-district/first-investigation/downloads/raw/washington_20260804_data.json; this edition reports the contest totals.
The 2026 primary counts include write-in votes and are on an all-candidate basis, a different basis than the named-candidate-only figures used everywhere else in this article.
The November 2026 general election had not occurred when these figures were recorded, so no primary-to-general comparison for 2026 exists yet.
Study scope
Population
Recorded named-candidate contest votes for State Senator, House Position 1 and House Position 2 in Washington's 31st Legislative District, King and Pierce counties, for the seven election cycles 2010, 2014, 2016, 2018, 2020, 2022 and 2024. 2012 is absent from this dataset because its source file returns HTTP 404. Senate appears on the ballot only in 2010, 2014, 2018 and 2022 in this dataset.
Place
Washington's 31st Legislative District (WA LD 31, boundary As drawn for each cycle's own election; no single boundary is assumed across all seven cycles.)
Period
Election cycles 2010 through 2024, 2012 absent: January 1, 2010 to December 31, 2024 (calendar)
Units
votes, percent, percentage points, share of King plus Pierce, primary votes per general vote
Excludes
Any candidate name, party label, incumbency, tenure or election outcome. Any court order, case or judge as the named cause of any change. Any forecast, probability, projection or extrapolation toward a future election, including the 2026 general election. 2012, for which no source file is available in this evidence. The incumbent tenure comparison and its subgroup tests. The 2022 House Position 2 general-election data-quality dispute.
Definitions
Named-candidate vote
The sum of vote totals for every individually named candidate row in a source, for a given race and year, excluding any row whose candidate field is the literal string WRITE-IN (case-insensitive). Version 2026-09 edition.
King share
King County's share of the district's recorded named-candidate vote for a given race, stage and cycle: King divided by King plus Pierce. Version 2026-09 edition.
Contest votes
Vote counts for one specific contest (State Senator, House Position 1 or House Position 2). Summing across the three contests does not produce a count of unique ballots or voters. Version 2026-09 edition.
Primary-to-general contest-vote ratio
For one race and year, that race's named-candidate primary vote count divided by its named-candidate general vote count. Not a registered-voter turnout rate. Version 2026-09 edition.
Updates
First edition · September 12, 2026
The first edition of this question at this address. Research on this district was published at /research/31st-district/ on September 11, 2026. Those pages reported the August 2026 primary counts and carried those shares forward as starting estimates for the November 2026 general election, and they are withdrawn with this edition, which publishes no estimate for an election that has not happened. The records under them stay published at their own addresses: the August vote counts, the certified candidate list with its certification document, the 2010 to 2024 race panel, and the reproduction archives and code. This edition carries nothing forward: it reports where the district's recorded votes came from in each observed cycle from 2010 to 2024 on one consistent named-candidate basis, the three year pairs that can be compared directly, the primary-to-general vote-count ratio, and the August 2026 counts as counts.
Whether a primary map or redistricting-commission document exists that would establish when this district's boundary changed.
Without such a document, this packet cannot say whether any of the three measured year-pair changes coincides with a boundary change, only report the years and the arithmetic.
Penner Strategy. Where the 31st Legislative District's recorded votes have come from, 2010-2024. Version 0001. September 12, 2026. https://pennerstrategy.com/research/wa-31st-district-vote-composition/editions/0001/. Qualification: Every count in this article except the 2026 primary table excludes any row whose candidate field is the literal string WRITE-IN, so it is a named-candidate count, not a full vote count.